Description
A two component air-drying enamel. It consists of an enamel intermediate (pigments, fillers, functional additives in resin and solvents solution) and an amine hardening agent.
Peculiarities of enamel
Resistant to acid- and alkali-solutions, creates deactivated coating.
Safety information
Film is nontoxic and flame-resistant.
Additional info
Preparation of surface
To clear it from dust, mud, ferrous oxide, corrosion and other contaminations with any mechanical way, clean off the grease.
Preparation of enamel
- intermediate of enamel EP-574К is stirred thoroughly and filtered.
- before application (30min), amine hardener is added in ratio 5.8 w.p. of amine hardener per 100w.p. of basis, or according to the data in COA;
- it is stirred thoroughly and if necessary, it is diluted to necessary viscosity with ethyl cellosolve, solutions Р-4, Р-5 or 646;
- enamel is used during 5 hours from the preparation moment.
Application
Enamel is applied in 2-3 layers on grounded with filling EP-0010К surface. Application of further layers of enamel is realized each 24 hours after the full drying of previous ones.
Methods
- brush (relative viscosity of enamel – 55-80 сс);
- roller ( - 55-80 сс);
- spray ( - 25-30 сс).
Consumption rate of material on grounded even surface
- one layer – from 120 g/m2.
|
Applications
For painting concrete and metal surfaces, for finishing building structures, rooms, and industrial equipment external surfaces. Its chemical stability allows use of the enamel for rooms with hostile environment. The enamel is radiation-resistant and useful for finishing building structures, rooms, and industrial equipment external surfaces in the nuclear power equipment. Shelf life
Shelf time: 6 months.
|
