 |
Phone/Fax: +38 (044) 222-56-94
Тел.: +38 (044) 599-26-47
Тел.: +38 (044) 451-56-94
|
|
Description
70% water-based emulsion of polymethyl siloxane fluid.
|
Applications
- as release compound in the production of furane rods in foundry.
- as mold-release agent in tyre manufacture as well as production of rubbers and plastic materials.
Shelf life
Shelf life - 12 months
|
|
| Physico-chemical properties |
| Content of silicon, % | 25 - 28 | | pH of aqueous extract | 6,0 - 7,5 | | Surface tension mN/cm, max | 40 | | Stability at dilution, hr, min. | 24 | |
|
|
|
Description
Emulsion GKE-50-94M is 50% emulsion of the fluid 136-157М. It has color within the range from white to light-grey. Safety information
Emulsion GKE 50-94M is nontoxic, explosion-proof, noncorrosive, evolves no harmful vapor nor gas, produces no irritating action to skin and conjunctiva.
|
Applications
- Emulsion GKE 50-94M serves to: impart hydrophobic (water-repellent) properties to a variety of fabrics, paper, and leather; improve humidity resistance of asbestos-cement board or gypsum cardboard, ceramics, porcelain or glass insulators, and building materials; formulate release agents for glass-forming surfaces.
- Hydrophobic coat formed on the surface after treatment with water-based emulsion does not prevent normal air change in the structure, produces no changes in the appearance of materials of construction, favors to reduction of dirt retention of face finish ,extending service life of the latter. Furthermore, it prohibits the drop in heat-insulating properties of building materials, possesses good resistance to the action of such factors as alternative freeze and thaw, and wetting and drying, UV beams, IR radiation.
- The treatment of the surface with water-repellent emulsion inhibits the growth of moss and lichen.
Shelf life
Shelf life - 12 months. Storage conditions: keep indoors away from sources of flame, acids, and alkalies.
|
|
| Physico-chemical properties |
| Hydrophobic power, hrs, min. | 3 | | Watering ability | withstands the test | |
|
|
|
Description
The Product is conformed to specs of Ukraine 24.6-33444644-014:2010.
Emulsion “ME-50/42” is represented as an aqueous emulsion of mineral oil. It is intended for dedusting and additional water-repelling treatment processing of various materials, including fiberglass and mineral wool products, treated by phenol-formaldehyde resin.
Safety information
Detailed safety information is in safety data sheet that can obtain in our sales departments.
Additional info
Application
The emulsion “ME-50/42” is applied jointly with binder by sputtering technique. The amount of the emulsion “ME-50/42” that applied is depended on demanding water-repellent properties of final product, therefore general recommendation doesn’t give. To quantify the product it is necessary to carry out individual tests. In many cases it is enough to use 0,6-1,2 % of emulsion from weight of dry fibrous material.
|
Applications
For prevention of formation fine-dispersed dust and for the purpose of giving water-repellent properties for glass fiber mats or mats from silicate cotton the emulsion “ME-50/42” is mixed with solution of phenol-aldehyde resin and other additives. As shelf life of various composite materials depends to a large extent on composition of phenol-aldehyde resin and additives, it is impossible to give a general reference concerning their compatibility.
The emulsion “ME-50/42” is used jointly with application of binder.
Treatment of glass wool and silicate cotton by the emulsion “ME-50/42” after drying and hardening is deprecated.
For increase in water-repellent properties it is recommended to use in composite with emulsion “SE-50/12”. Shelf life
Storage life of the emulsion “ME-50/42” is 6 months from manufacture date. It should keep at a temperature from 5 °С to 40 °С in hermetically closed container of manufacturer in closed cellarage, protect they from ingress of moisture and influence of direct sunbeams, in the distance form heaters and also from capacities with strong oxidizing agents, strong alkalis and acids.
A consumer can self-determined use the product after termination of warranty shelf life after conformance inspection of quality in accord with requirements of specs “Water-repellent Emulsions”, the specs of Ukraine 24.6-33444644-014:2010.
|
|
| Physico-chemical properties |
| Appearance | homogeneous liquid without mechanical impurities, the colour is not normalized | GOST 20841.1 and
the specs of Ukraine 24.6-33444644-014:2010 | | Mass fraction of nonvolatile substance, % | no less than 48 | GOST 17537 and
the specs of Ukraine 24.6-33444644-014:2010 | | Viscosity at a temperature (20 ± 2,0) °C, s | 30 - 150 | GOST 8420 and
the specs of Ukraine 24.6-33444644-014:2010 | | Stability at a dilution, hour | no less than 24 | the specs of Ukraine 24.6-33444644-014:2010 | | Ignition temperature, °C | is absent | GOST 12.1.044-89 | | Elliot test, °C | is absent | GOST 12.1.044-89 | | Marcusson test, °C | >288 | GOST 12.1.044-89 | |
|
|
|
Description
The Product is conformed to specs of Ukraine 24.6-33444644-014:2010.
Emulsion “MSE-50/43” is represented as an aqueous emulsion of oligodimethylhydrosiloxan and of mineral oil.
It is intended for dedusting and additional water-repelling treatment processing of various materials, including fiberglass and mineral wool products, treated by phenol-formaldehyde resin.
Safety information
Detailed safety information is in safety data sheet that can obtain in our sales departments.
Additional info
Application
The emulsion “MSE-50/43” is applied jointly with binder by sputtering technique. The amount of the emulsion “MSE-50/43” that applied is depended on demanding water-repellent properties of final product, therefore general recommendation doesn’t give. To quantify the product it is necessary to carry out individual tests. In many cases it is enough to use 0,6-1,2 % of emulsion from weight of dry fibrous material.
|
Applications
For prevention of formation fine-dispersed dust and for the purpose of giving water-repellent properties for glass fiber mats or mats from silicate cotton the emulsion “MSE-50/43” is mixed with solution of phenol-aldehyde
resin and other additives. As shelf life of various composite materials depends to a large extent on composition of phenol-aldehyde resin and additives, it is impossible to give a general reference concerning their compatibility.
The emulsion “MSE-50/43” is used jointly with application of binder.
Treatment of glass wool and silicate cotton by the emulsion “MSE-50/43” after drying and hardening is deprecated. Shelf life
Storage life of the emulsion “MSE-50/43” is 6 months from manufacture date. It should keep at a temperature from 5 °С to 40 °С in hermetically closed container of manufacturer in closed cellarage, protect they from ingress of moisture and influence of direct sunbeams, in the distance form heaters and also from capacities with strong oxidizing agents, strong alkalis and acids.
A consumer can self-determined use the product after termination of warranty shelf life after conformance inspection of quality in accord with requirements of specs “Water-repellent Emulsions”, the specs of Ukraine 24.6-33444644-014:2010.
|
|
| Physico-chemical properties |
| Appearance | homogeneous liquid without mechanical impurities, the colour is not normalized | GOST 20841.1 and
the specs of Ukraine 24.6-33444644-014:2010 | | Mass fraction of nonvolatile substance, % | no less than 48 | GOST 17537 and
the specs of Ukraine 24.6-33444644-014:2010 | | Viscosity at a temperature (20 ± 2,0) °C, s | 30 - 150 | GOST 8420 and
the specs of Ukraine 24.6-33444644-014:2010 | | Stability at a dilution, hour | no less than 24 | the specs of Ukraine 24.6-33444644-014:2010 | | Ignition temperature, °C | is absent | GOST 12.1.044-89 | | Elliot test, °C | is absent | GOST 12.1.044-89 | | Marcusson test, °C | >285 | GOST 12.1.044-89 | |
|
|
|
Description
The Product is conformed to specs of Ukraine 24.6-33444644-014:2010.
Emulsion “SE-50/12” is represented as an aqueous emulsion of oligodimethylhydrosiloxan. It is intended for finishing and water-repelling treatment processing of various materials, including fiberglass and mineral wool products, treated by phenol-formaldehyde resin.
Safety information
Detailed safety information is in safety data sheet that can obtain in our sales departments.
Additional info
Application
The emulsion “SE-50/12” or mix of the emulsion “SE-50/12” and the emulsion “ME-50/42” is applied jointly with binder by sputtering technique. The amount of the emulsion “SE-50/12” or mix of the emulsion “SE-50/12” and the emulsion “ME-50/42” that applied is depended on demanding water-repellent properties of final product, therefore general recommendation doesn’t give. To quantify the product it is necessary to carry out individual tests. In many cases it is enough to use no less than 0,2% of the emulsion “SE-50/12” or 0,6-1,2 % of mix of the emulsion “SE-50/12” and the emulsion “ME-50/42” from weight of dry fibrous material.
|
Applications
For the purpose of giving water-repellent properties for glass fiber mats or mats from silicate cotton the emulsion “SE-50/12” is mixed with solution of phenol-aldehyde resin and other additives.
If it is necessary, except to achieve water-repellent action, to prevent the formation of fine-dispersed dust in the production of glass fiber mats or mats from silicate cotton, it should be used the emulsion “SE-50/12” mixed with the emulsion “ME-50/42”. Mixing ratio is 1 party by weight of the emulsion “SE-50/12” on 3-5 parties by weight of the emulsion “ME-50/42”. In this case the mix of emulsions is also mixed with a solution of phenol-aldehyde resin and other additives.
As shelf life of various composite materials depends to a large extent on composition of phenol-aldehyde resin and additives, it is impossible to give a general reference concerning their compatibility.
The emulsion “SE-50/12” or mix of the emulsion “SE-50/12” and the emulsion “ME-50/42” is used jointly with application of binder.
Treatment of glass wool and silicate cotton by the emulsion “ME-50/42” or by mix of the emulsion “SE-50/12” and the emulsion “ME-50/42” after drying and hardening is deprecated.
Shelf life
Storage life of the emulsion “SE-50/12” is 6 months from manufacture date. It should keep at a temperature from 5 °С to 30 °С in hermetically closed container of manufacturer in closed cellarage, protect they from ingress of moisture and influence of direct sunbeams, in the distance form heaters and also from capacities with strong oxidizing agents, strong alkalis and acids.
A consumer can self-determined use the product after termination of warranty shelf life after conformance inspection of quality in accord with requirements of specs “Water-repellent Emulsions”, the specs of Ukraine 24.6-33444644-014:2010.
|
|
| Physico-chemical properties |
| Appearance | homogeneous liquid without mechanical impurities, the colour is white | GOST 20841.1 and
the specs of Ukraine
24.6-33444644-014:2010 | | Mass fraction of nonvolatile substance,% | no less than 48 | GOST 17537 and
the specs of Ukraine 24.6-33444644-014:2010 | | Viscosity at a temperature (20 ± 2,0) °C, s | 30 - 150 | GOST 8420 and
the specs of Ukraine 24.6-33444644-014:2010 | | Stability at a dilution, hour | no less than 24 | the specs of Ukraine 24.6-33444644-014:2010 | | Medium reaction (pH 25% of aqueous solution) | 6,0-7,0 | the specs of Ukraine 24.6-33444644-014:2010 | | Mass fraction of silicon, % | 18-22 | GOST 20841.2 and
the specs of Ukraine 24.6-33444644-014:2010 | | Ignition temperature, °C | is absent | GOST 12.1.044-89 | | Elliot test, °C | is absent | GOST 12.1.044-89 | | Marcusson test, °C | is absent | GOST 12.1.044-89 | |
|
|
|
